T&P Hoses P2 - Documenting Hose Lengths

How do I show hose lengths? How to document hoses? I need to document cut lengths, swage distance as well as overall lengths, so how to do that?

               

                Last week we covered BOM structure for hoses and I’ve showed you how to mark them as single items in BOM / Parts List. This is useful if you don’t’ manufacture the hose and you don’t need to show all the sub-parts individually.

                But what if you need to show those dimensions and send the drawing over to whoever is going to manufacture it; assuming it’s not a standard stock item.

                Hoses are created as a subassembly in tube and pipe and you get the route, the sweep part and the connectors (depending on style settings) in one single assembly.

Hoses are created as assemblies

                Unfortunately the info is not at the assembly level and it can’t be exposed when changing BOM structure to “Purchased” or “Inseparable” (check my previous post here). All the info is created in the hose part (the one containing the sweep).

                If you open the hose and check the parameters window you can find a couple of parameters defining the various lengths for the hose (they are exposed as custom iproperties as well.)

                If you open the parameters window here’s what you will find:

PL - Pipe Length (hose in this case)

RPL - I believe this is "Rounded Pipe Length" (hose in this case)

OPL - I believe this is "Overall Pipe Length" (hose in this case)

ROPL - I believe this is "Rounded Overall Pipe Length" (hose in this case)

Parameters exposed to iProperties.

If you have connectors each end (like I do) you will notice that the sweep sketch is made from a spline and 2 straight lines (swage distance). Measuring the spline and the individual lengths you will get PL(hose length) which is then rounded to the nearest increment (changeable from the T&P route style) and you then get RPL (rounded hose length).

Rounded increment is declared in the Route Style

OPL (overall hose length) you get by adding the connector lengths to the PL (hose length) and just like above when you round this to the nearest increment you get ROPL (rounded overall hose length).

                If you need this info in the Parts List you need to add these custom iproperties manually by editing the drawing table. However if you marked the hose as “Inseparable” or “Purchased” the info will not show up.

                In both cases you can add a Leader Line and use the “Custom Properties – Model” to show these on the drawing.

Use Leader Lines to document the various lengths

                Here's a short animation of the process.

Later,

ADS photo credit: Garden hose (license)

T&P Hoses P1 - BOM Structure

Do you include hoses and flexible tubing to your design? Are you thinking into taking your products to next level by adding this info to your design?

While we use them in our plant layouts we don’t really document them on the drawing but nonetheless there are some good practices as well as tips and tricks.

Will keep this simple and split it into separate blogs and for now the question is:

How can I show a hose assembly as single part?

We are not hose manufacturers so it would help to see the assembly in the Parts Only section of the BOM along with all the fittings, valves, conduits, all parts really to be purchased.

This needs editing the BOM and changing the “BOM Structure” field to one of these 2 options:

- Mark it as “Purchased”

-Mark it as “Inseparable”

For all my life I have been thinking about “Inseparable” items as welded, casted, glued, press fitted, riveted kind of items but it’s really just a way of grouping several parts in BOM.

“Purchased” it’s what I’ve been using and it’s a nice way of merging multiple parts as a single item. Think of skids, tanks, etc. or any assembly which you vendor has sent over and you consider that a single purchase / single item.

The advantages of keeping it or importing it as assembly rather than single part is you can play with Level Of Detail (LOD), Design View Representations or show different positional representations.

 In the Structured tab you can still expand and collapse it (if show all levels is active), edit the iproperties but now it shows up in the Parts Only section of the B.O.M.

At this point should mention that if you want to show the child components of the hose assembly you will change the BOM Structure to “Phantom”. This will promote the children and hide the subassembly; I use this all the time to group things together for less constraints, improved pattern, etc.

Changing Bom Structure type.

Later,
ADS


photo credit: Steel-braided hose (license)